Your car's To-Do list?

[blackparis]

Originally Posted by QuickLT1

No No.....thats FORD!

Well... Thats like 20hours of pay And I like it that way!

Ford Technichian = Job Security

[thefrush]

Originally Posted by blackparis

Ford Technichian = Job Security

Most funny yet blatantly true thing I've read in a while.

My list:

-New rotors
-Install SPA gauges and shift light
-Get Fiberglass hood painted and installed
-Install strut tower bar
-Figure out an LSD solution
-Burn off my current tires so I can use my 16x8s.
-New seat(s) and harnesses.
-Lose weight

Oy, I got some work to do.

[jays05]

Originally Posted by Shawn96VR-4

Edited for ya.

If you're so confident why are you already asking for carlengths?

It will be an interesting race to say the least.

[slowtaco]

Shit:
Forged Motor
Rebuilt Tranny
New intercooler
New turbo
Coolant lines
DP extend
Suspension
Wheels/tires
Stall converter
Injectors
Honda resistor box
Brakes
Drive Shaft Loop

[JiM P 2001]

Priorities:

• Re-paint Front Bumper
• New Fog Light Housings/Lenses
• HID Heads & Fogs
• Build Custom Enclosure and Amp Rack
• Tokico Illumina Struts
• Drilled/Slotted Rotors & EBC Green Pads
• Solid Motor Mounts
• DSS Axles
• Front & Rear DC Strut Tower Bars
• Tow Hooks
• Get Wheels Powdercoated
• Tint Windows

Once thats done I'll get back to the drivetrain again... My goal is 330whp by the end of summer on the stock turbo.

[mikecentola]

Originally Posted by blackparis

I love it when people bring (tow) their F-350s into the dealership, cause they did all this, then they need a new Turbo, so theyget a bigger one, then they need new engine a month later... they just dont understand deisle! BTW: Most BANKS chips make the engine run tooo lean, hope thats not what you were planning on....

The new 6.4 is worse...

6.0L motor for the win. There's a reason they call it the hotrod motor. The exhaust is a 5" stainless turbo back, intake is just a replacement airbox and filter, and the chip is the new SCT tunable one. I think its called the SCT Livewire. I would also do a custom tune on it, and have Howard work his magic. I'm not positive I'll do anything like that. I'll probably just put the head unit and sub in there and have a good time.

I'm not an idiot. Thanks for playing

[MikeyB.]

my list-
-Front control arms
-bilstein shocks(front)
-Front and rear brakes
-lt headers
-x-pipe
-slp loudmoth exhaust
-then actually drive it
-save for motor mods
-better wheels and tires
im sure theres more but i cant think i havent had coffee yet.

[Shawn96VR-4]

Originally Posted by jays05

If you're so confident why are you already asking for carlengths?

It will be an interesting race to say the least.

Confident because I got 5 lengths. How do you think I am going to win?

Yes, it will be.

[SilverRT4]

List:

Sell Car
Ride Huffy

[19Cutlass94]

Huffy ftw! Youll be rolling on 20's stock! haha

Ive still gotta get mine put back together, do a complete wax, and I think I migth start to built up this extra motor I have, although Im still unsure of the direction I wanna go with it...

[PJB]

Mustang:
-get wheels balanced
-get alignment done
-buy a fiberglass hood
-buy a right fender
-install new headlights and parking lights (clear)
-Get bodywork finished and car put back together
-install new heads, rockers, pushrods, lifters, cam, waterpump and timing chain
-replace rear main seal
-fix transmission tailshaft seal
-get shift kit installed
-buy and install stall converter
-get drag radials mounted
-get and install 24 lb/hour fuel injectors and MAF calibrated for them (eventually)
-drive it like I stole it

Currently the car is apart at my friend's bodyshop.

Elantra:
-get new tires by the end of summer

[Oppie1]

1JZ GTE
Replacement turbos or single turbo.
Intercooler
Radiator
Drive Shaft
Clutch
Flywheel
1JZ Bell housing
Wiring Harness
ECU/Some type of Engine Mngmt
Some other misc swap parts
Front racing seats
Harnesses
Rear seat reupholster
Wheels
Lowering
Paint job
Engine Mngmt
Gauges
Stereo
Speakers

I'm probably missing a few things.

To sum it up: Everything.