Truck Lighing Dilemma

mikecentola · #1 (**permalink**) 05-01-2008, 09:12 PM

Ok so I've got a small dilemma here... I had bought 3000K HID's for my stock foglights for the truck. They're H10. I got the new front bumper which doesn't have any mounts for the stock foglights. I can't decide what to do. Should I try to make them work somewhere on the bumper? Get new ones? Forget about them all together?

I will have HID's in the headlights, and 4 8" KC Hilites with HID's.

Any thoughts?

crazybrew609 · #2 (**permalink**) 05-02-2008, 04:24 AM

drill 2 holes a problem solved.. or sell them to kenny and just forget about them.. kenny needs 2 fog lights for his bumper

mikecentola · #3 (**permalink**) 05-02-2008, 06:17 AM

well the problem is that the only reasonable place I found to mount them was right in front of the winch and I think the cable might hit them... let me find a pic...

mikecentola · #4 (**permalink**) 05-02-2008, 06:29 AM

In this pic it looks like the winch is right behind it, but on mine there is just barely enough room to sqeeze the factory foglights in there.

Like I mentioned above, another option is to just find some smaller h3 fogs and mount them somewhere and put 3000K hid's in them and sell my stock fogs and the hid's with them...

AussieDan · #5 (**permalink**) 05-02-2008, 06:46 AM

Ditch the stockers and get yourself some lightforce lights.

I'm thinking a pair of 240 driving lights flanked by 140 fogs

VOTBLINDUB · #6 (**permalink**) 05-08-2008, 09:49 AM

i say mount the lights somehow. i mean, youve already got em, so if you think they work well, then keep em and just stick em on there

mikecentola · #7 (**permalink**) 05-08-2008, 08:16 PM

i think i'm going to sell the h10 hid's and get some 3000K h3 hids and some KC hilites model 50 5" lights and put them on the bumper for fogs